Hatz TL 17Picture 31 of 41 |
|
||||
Hatz TL 17 | Picture made by hooidonk
[@soybean] [@wim-same] Tonight I took apart the donor block from the Hatz further. Both cylinders have something of a bumping edge at the top of the cylinder on one side (driving right). So maybe from the block still in the tractor, try replacing just the head? The copper ring under the cylinder is thinner than the one between the cylinder and the head, so I could possibly turn that around as well. Then the cylinder will also be higher. But maybe the thin one will be under the cylinder for a reason? Less temperature difference? I tested the valves on this head. Thinner stayed on them, WD40 crawled through. But that creeps in everywhere of course.
Tractor Battle
Which tractor do you like the best? Choose now, left or right!
