Hatz TL 13Picture 83 of 161 |
|
||||
Hatz TL 13 | Picture made by hooidonk
Was able to pick up the Hatz parts again this week. Milled out the old axles from the stub axles and made new ones. Also adjusted the bearing bushings so that the new bearing fits. There will now be a needle ring on the spot where the front axle rests on the stub axle, instead of the sliding scales that were in there before, because they were no longer to be found. The advantage now is that it will steer lighter. The old dust cap that falls over it has been adapted to the new bearing, so if all goes well, you won't see anything of it anymore. The pedals are also back. These had quite some space on the axle and wobbled happily back and forth. Drilling out a new bushing was not easy, because everything is skewed. So they were still lopsided. So now the holes have been welded shut and they have made new holes on the milling machine. So they will be right again. The PTO cover also came in this week. Unfortunately I couldn't find one with the right distance between the holes. So I took off the flange and made a good basis to make a new one.
Tractor Battle
Which tractor do you like the best? Choose now, left or right!
