Deutz-Fahr DX 4.30Picture 43 of 272 |
|
||||
Deutz-Fahr DX 4.30 | Picture made by KlaasM
Last night the whole thing was pulled out. The control panel part was terribly greasy and dirty and did not run well. The shafts that ran through the body with the forks on them were okay but there is still room for improvement. Both thrust bearings were mediocre and both seals leaked. I think that is why it got so dirty. The clutch was still reasonable but I decided to pick up an exchange clutch cover. On the engine side, the seal is now in place. And both thrust bearings have been replaced. That stuff can be put back in soon
Tractor Battle
Which tractor do you like the best? Choose now, left or right!
